IPP&T Magazine Online

Bright-eyed displays for Modbus level sensors

March 8, 2018  

Print this page

Tired of being up close and personal with your data display? Get your data from a distance with the new DPM-100 digital panel meter from BinMaster. Used indoors or outdoors, the vibrantly bright and large red LED display is visible in bright sunlight, fog, dust, or yards away.
The DPM-100 can be used with Modbus non-contact or guided wave radar or other level sensors for level detection in process operations. Large upper and lower dual-line LED displays can be configured to view your most important measurements. Handy alerts prevent overfilling or material outages for storage vessels containing liquids, powders, or solids. It can be set to automatically scan at assigned intervals, or a manual scan can be easily initiated when needed. With advanced linearization capability, data can be mathematically manipulated to compensate for odd vessel shapes or submerged structures.  Data is safely stored in non-volatile memory for up to ten years if power is lost.

What makes the DPM-100 digital panel meter special:
• Compatible with all Modbus-enabled sensors. It can be programmed as a Modbus RTU master, slave, or snooper;
• Continuously scans for up to 16 process variables providing real-time data to measure, monitor, and control multiple vessels; and
• Simple keypad controls allow users to set and acknowledge alarms and manage output relays at the push of a few buttons.


Print this page